ianstone
07-15-2010, 10:18 PM
Bloodhound diary: All aboard, here we go
http://newsimg.bbc.co.uk/media/images/46669000/jpg/_46669854_ag.jpg
http://newsimg.bbc.co.uk/shared/img/o.gif
http://newsimg.bbc.co.uk/shared/img/999999.gif
RAF fighter pilot Andy Green intends to get behind the wheel of a car that is capable of reaching 1,000mph (1,610km/h). Powered by a rocket bolted to a Eurofighter-Typhoon jet engine, the Bloodhound car will mount an assault on the land speed record.
Wing Cmdr Green is writing a diary for the BBC News Website about his experiences working on the Bloodhound project and the team's efforts to inspire national interest in science and engineering.
BUILDING THE WORLD'S FASTEST CAR
http://newsimg.bbc.co.uk/media/images/48108000/jpg/_48108174_raftyphonlanding.jpg The car will use jet fighter tyres for "slow" (250mph) tests
The highlight of the past month has been the design conference at the Bloodhound Technical Centre in Bristol. The rate of progress in the last few weeks has been dizzying.
• The wheel profiles have been chosen and we're completing the detailed wheel design. The wheels will be solid aluminium and the profile of the tread is critical, as it determines how much sideways grip the metal wheels can produce - too much grip and the car could turn over, too little grip and it will be uncontrollable. After reviewing the wheel designs so far (http://www.bloodhoundssc.com/car/engineering_updates.cfm?widCall1=customWidgets.con tentItem_show_1&cit_id=4639), we're going for a simple V-shaped keel.
• The wheels for our "slow-speed" (up to 250 mph!) UK runway testing will use jet fighter aircraft tyres. These runway tests will be the first runs of the car and will be a vital part of the development, before we head out to South Africa for our record attempts. (If you want to come and see the car being tested in the UK, you need to join our Supporters Club (http://www.bloodhoundssc.com/supporters_club.cfm) as a Gold Member).
http://newsimg.bbc.co.uk/media/images/48107000/jpg/_48107987_bloodhoundsscfrontview_small.jpg The winglets will be used to trim aerodynamic loads if required
• The control method has been agreed for the "winglets" on the nose and tail of Bloodhound. These winglets will trim the aerodynamic loads on the car (up to 12 tonnes per sq m - which is a lot) if required. We have to keep these huge loads perfectly balanced, without too much down force (which would crush the car) and definitely without any lift! The latest modelling results say that we've found a near-perfect shape and that we won't need to trim the loads - but at the limits of technology, things never quite work out as you expect, so we're fitting winglets just in case.
• The installation of the Falcon hybrid rocket has been decided, using a "simple" (in rocket science terms!) clamp at the back end and a quick-release connector at the front. The rocket has to be very securely fixed while it produces the 12 tonnes of thrust that will take the car from 350mph to 1,000mph in 20 sec. Then, to set a world record, we have to replace the rocket pack for a return run within one hour - hence the need for quick-release attachments.
• The maximum load for the brake parachutes has been fixed: Nine tonnes of drag sounds like a lot, but it's really not much to stop a five-tonne car from 1,000mph. The nine tonnes of extra drag will give us a peak deceleration of minus 3g. Much less than this and the car will go off the end of the track, much more and it will damage the car (and it won't be much fun for me either).
• The manufacture of the car has been detailed (as 300 separate sub-assemblies - no-one said this would be easy). The chassis construction will be carbon fibre for the front half, including the cockpit, and mostly steel and aluminium for the rear fuselage.
http://newsimg.bbc.co.uk/media/images/48107000/jpg/_48107962_dutaway.jpg Cutaway: 300 sub-assemblies in close formation
Mark Chapman, as chief engineer, is doing a fantastic job of leading the team through this process. Mark's background with Rolls-Royce and Boeing, including four years working on the new F-35 Joint Strike Fighter, appears to have been perfect preparation for designing the world's fastest car.
Of course, one tricky problem still remains - finding the rest of the money to pay for the build.
We're still a long way from funding the entire project, but in the last month we've had a surge of interest from major companies, broadcasters, etc. who are seeing the huge commercial potential for the world's fastest-ever car. They've picked a good time to get involved - the project is really starting to take off.
http://newsimg.bbc.co.uk/media/images/48108000/jpg/_48108140_malcolmcampbell-verneuk1929.jpg Malcolm Campbell just missed a record in South Africa in 1929
We also need to remember that Bloodhound is not just about a speed record - it's about inspiring the next generation of engineers.
Our nationwide education programme continues to grow, with student groups fascinated by the design of a 1,000mph car (http://www.bloodhoundssc.com/education/facts_about_the_car.cfm).
We're delivering to over 3,500 UK schools and colleges, and seeing more organisations wanting to get involved in the education programme, which is great - we need all the help we can get.
To quote one teacher at a recent education event: "Blimey, you've got a long way to go to raise the aspirations of some of our students". Precisely - but if this was easy, we wouldn't need a 1,000mph car to do it!
The education message is also going to be very important to our South African audience.
Their whole nation is gripped by World Cup fever this month, but after that they're going to start promoting their next world-class event - Bloodhound SSC.
I did a video conference with the South African media at the start of May, and the interest is already very high - they can't wait for us to get started.
There is also a tremendous sense of history about what we're doing. A couple of weeks ago I spoke to Lloyds Motor Club.
I recalled the links between Lloyds and the Land Speed Record: Malcolm Campbell (nine times record holder) worked at Lloyds, as did his equally famous record-breaking son, Donald.
Of course, Malcolm was also the only person ever to attempt a land speed record in South Africa (http://www.bloodhoundssc.com/adventure/the_desert/verneuk_pan_survey_trip.cfm).
In 1929, he ran at Verneuk Pan in the north west of the country, not far from the new Bloodhound track at Hakskeen Pan.
Campbell just missed the outright record in 1929, so there's unfinished business for Bloodhound to take care of. We'll be there soon enough.
http://newsimg.bbc.co.uk/media/images/45133000/gif/_45133873_land_speed_compare466.gif
http://newsimg.bbc.co.uk/media/images/46669000/jpg/_46669854_ag.jpg
http://newsimg.bbc.co.uk/shared/img/o.gif
http://newsimg.bbc.co.uk/shared/img/999999.gif
RAF fighter pilot Andy Green intends to get behind the wheel of a car that is capable of reaching 1,000mph (1,610km/h). Powered by a rocket bolted to a Eurofighter-Typhoon jet engine, the Bloodhound car will mount an assault on the land speed record.
Wing Cmdr Green is writing a diary for the BBC News Website about his experiences working on the Bloodhound project and the team's efforts to inspire national interest in science and engineering.
BUILDING THE WORLD'S FASTEST CAR
http://newsimg.bbc.co.uk/media/images/48108000/jpg/_48108174_raftyphonlanding.jpg The car will use jet fighter tyres for "slow" (250mph) tests
The highlight of the past month has been the design conference at the Bloodhound Technical Centre in Bristol. The rate of progress in the last few weeks has been dizzying.
• The wheel profiles have been chosen and we're completing the detailed wheel design. The wheels will be solid aluminium and the profile of the tread is critical, as it determines how much sideways grip the metal wheels can produce - too much grip and the car could turn over, too little grip and it will be uncontrollable. After reviewing the wheel designs so far (http://www.bloodhoundssc.com/car/engineering_updates.cfm?widCall1=customWidgets.con tentItem_show_1&cit_id=4639), we're going for a simple V-shaped keel.
• The wheels for our "slow-speed" (up to 250 mph!) UK runway testing will use jet fighter aircraft tyres. These runway tests will be the first runs of the car and will be a vital part of the development, before we head out to South Africa for our record attempts. (If you want to come and see the car being tested in the UK, you need to join our Supporters Club (http://www.bloodhoundssc.com/supporters_club.cfm) as a Gold Member).
http://newsimg.bbc.co.uk/media/images/48107000/jpg/_48107987_bloodhoundsscfrontview_small.jpg The winglets will be used to trim aerodynamic loads if required
• The control method has been agreed for the "winglets" on the nose and tail of Bloodhound. These winglets will trim the aerodynamic loads on the car (up to 12 tonnes per sq m - which is a lot) if required. We have to keep these huge loads perfectly balanced, without too much down force (which would crush the car) and definitely without any lift! The latest modelling results say that we've found a near-perfect shape and that we won't need to trim the loads - but at the limits of technology, things never quite work out as you expect, so we're fitting winglets just in case.
• The installation of the Falcon hybrid rocket has been decided, using a "simple" (in rocket science terms!) clamp at the back end and a quick-release connector at the front. The rocket has to be very securely fixed while it produces the 12 tonnes of thrust that will take the car from 350mph to 1,000mph in 20 sec. Then, to set a world record, we have to replace the rocket pack for a return run within one hour - hence the need for quick-release attachments.
• The maximum load for the brake parachutes has been fixed: Nine tonnes of drag sounds like a lot, but it's really not much to stop a five-tonne car from 1,000mph. The nine tonnes of extra drag will give us a peak deceleration of minus 3g. Much less than this and the car will go off the end of the track, much more and it will damage the car (and it won't be much fun for me either).
• The manufacture of the car has been detailed (as 300 separate sub-assemblies - no-one said this would be easy). The chassis construction will be carbon fibre for the front half, including the cockpit, and mostly steel and aluminium for the rear fuselage.
http://newsimg.bbc.co.uk/media/images/48107000/jpg/_48107962_dutaway.jpg Cutaway: 300 sub-assemblies in close formation
Mark Chapman, as chief engineer, is doing a fantastic job of leading the team through this process. Mark's background with Rolls-Royce and Boeing, including four years working on the new F-35 Joint Strike Fighter, appears to have been perfect preparation for designing the world's fastest car.
Of course, one tricky problem still remains - finding the rest of the money to pay for the build.
We're still a long way from funding the entire project, but in the last month we've had a surge of interest from major companies, broadcasters, etc. who are seeing the huge commercial potential for the world's fastest-ever car. They've picked a good time to get involved - the project is really starting to take off.
http://newsimg.bbc.co.uk/media/images/48108000/jpg/_48108140_malcolmcampbell-verneuk1929.jpg Malcolm Campbell just missed a record in South Africa in 1929
We also need to remember that Bloodhound is not just about a speed record - it's about inspiring the next generation of engineers.
Our nationwide education programme continues to grow, with student groups fascinated by the design of a 1,000mph car (http://www.bloodhoundssc.com/education/facts_about_the_car.cfm).
We're delivering to over 3,500 UK schools and colleges, and seeing more organisations wanting to get involved in the education programme, which is great - we need all the help we can get.
To quote one teacher at a recent education event: "Blimey, you've got a long way to go to raise the aspirations of some of our students". Precisely - but if this was easy, we wouldn't need a 1,000mph car to do it!
The education message is also going to be very important to our South African audience.
Their whole nation is gripped by World Cup fever this month, but after that they're going to start promoting their next world-class event - Bloodhound SSC.
I did a video conference with the South African media at the start of May, and the interest is already very high - they can't wait for us to get started.
There is also a tremendous sense of history about what we're doing. A couple of weeks ago I spoke to Lloyds Motor Club.
I recalled the links between Lloyds and the Land Speed Record: Malcolm Campbell (nine times record holder) worked at Lloyds, as did his equally famous record-breaking son, Donald.
Of course, Malcolm was also the only person ever to attempt a land speed record in South Africa (http://www.bloodhoundssc.com/adventure/the_desert/verneuk_pan_survey_trip.cfm).
In 1929, he ran at Verneuk Pan in the north west of the country, not far from the new Bloodhound track at Hakskeen Pan.
Campbell just missed the outright record in 1929, so there's unfinished business for Bloodhound to take care of. We'll be there soon enough.
http://newsimg.bbc.co.uk/media/images/45133000/gif/_45133873_land_speed_compare466.gif